Rep 4.5.4 Transfer Roller - Xerox DocuPrint P1202 Service Manual

REP 4.5.4 Transfer Roller

Removal
1 Disconnect the AC Power Cord and remove the Paper Tray.
2 Remove the Printer Cartridge (REP 4.5.1).
3 Remove the System Controller PWB (REP 4.6.2).
4 Remove the Control Panel Harness Cover (REP 4.1.2).
5 Disconnect the Control Panel Harness from J1 on the Control Panel
6 Remove the Main Cover (REP 4.1.3).
NOTE: Be careful not to touch the BTR roll with your hands
7 Using a flat head screw driver slowly lift up the right end of the BTR Roller as shown in (Figure
4.5.4a).
Repair Procedures
Figure 4.5.4a.BTR Roller Remova
3/99
www.printcopy.info
4-32
egl_309a
Xerox DocuPrint P1202 Service Manual