10 Remove the Ground Screw (Figure 4.2.1b).
11 Remove the two screws that secure the Pick-Up Roll Assembly to the printer (Figure 4.2.1c).
12 Lift the Pick-Up Roll upward and out of the printer.
NOTE: If the Pick-Up Roll is to be replaced individually, go to step 13.
Repair Procedures
Figure 4.2.1b Remove Ground Screw
Figure 4.2.1c Pick-Up Roll Assembly Removal
3/99
www.printcopy.info
4-12
egl_320a
egls319a
Xerox DocuPrint P1202 Service Manual