Printer Operations; Control Panel - Xerox DocuPrint P1202 Service Manual

5.2 Printer Operations

5.2.1 Control Panel

The Control Panel (Figure 5.2.1) is located on the right forward corner of the Front Cover Assembly. The
Control Panel includes a single On/Off-line button and three indicator LEDs.
The On/Off-line button has multiple functions that enable the user to select the desired operation.
The four Indicator LEDs: red (Error), (Manual), amber (Paper), and green (Ready). These LEDs indicate
the printer's status. (More detailed information about printer status is available through the Status
Monitor software utility.)
The table below provides various LED conditions and describes their significance.
Error LED (blink)
Paper LED (blink)
Ready LED (blink)
Xerox DocuPrint P1202 Service Manual
Figure 5.2.1 Control Panel.
Indicator
Error LED (on) There is no print cartridge.
The cover is open.
There is a paper jam (if the Paper LED is on).
Other error condition.
Printer memory is insufficient for print job.
Paper LED (on) The paper tray is empty.
There is a paper jam (if Error LED is also on).
The printer is on manual feed mode (push On/Off-line
button to feed paper from manual feeder).
Ready LED (on) The printer is ready to receive and process data.
The printer is receiving or processing data.
Ready LED (off) The printer is offline
All LEDs (blink) Possible printer failure.
www.printcopy.info
Xerox DocuPrint P1202
egl_409a
Description
3/99
5-5 General Procedures and Information
Error LED
Manual LED
Paper LED
Ready LED
Front Panel Key
sm5_007a