Xerox DocuPrint P1202 Service Manual page 65

11 Remove the four screws that secure the Fuser Assembly to the printer (Figure 4.4.1d).
12 Remove the Fuser Assembly
To remove the Fuser Heat Rod:
13 Remove the screw that secures the Heat Rod Terminal to the right end of the Fuser Assembly
and slide the Heat Rod out of the Fuser Assembly (Figure 4.4.1e).
Xerox DocuPrint P1202 Service Manual
Figure 4.4.1d. Fuser Assembly.
Figure 4.4.1e Heat Rod Removal
3/99
www.printcopy.info
4-23
egl_348a
egl_353a
Repair Procedures