Siemens SITOP UPS1600 Equipment Manual page 74

Engineering and remote access
3.4 SIMATIC STEP 7 in the TIA Portal
Charging
Parameter
Deactivate charging
Maximum permissible charge current
• Deactivate charging
Shut down battery charging
• Maximum permissible charge current
Max. permissible current to charge the battery
Energy storage
The parameters in Section "Energy storage" are dependent on the battery type used.
Configure the type of the battery module you are using SITOP BAT1600, SITOP UPS1100 or
third-party battery.
Parameters when using a SITOP BAT1600 or SITOP UPS1100 battery module
Parameter
Battery module
Number of modules
Total capacity
• Battery module
Type of SITOP BAT1600, SITOP UPS1100 battery modules or third-party battery
• Number of modules
Number of installed modules.
• Total capacity
Total capacity of the installed battery modules.
74
Value range
Yes / No
3,000 mA / 4,000 mA / 5,000 mA
Value range
Drop-down menu with the SITOP BAT1600, SITOP UPS1100 battery modules
or third-party battery saved by the HSP.
1 - 6
0 - 228 Ah
Default setting
No
3,000 mA / 4,000 mA / 5,000 mA
Default setting
-
1
-
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76