Siemens SITOP UPS1600 Equipment Manual page 141

Reset to factory settings
A reset to the factory settings deletes all hardware and software configurations stored in the
SITOP UPS1600 and restores the factory settings.
This affects, for example:
• IP address
• Device name
• Parameter values for the SITOP UPS1600 and assigned supplementary modules.
• "Web server activated" setting. Web server is de-activated.
Procedure
1. Select menu "Diagnostics".
2. Select submenu "Online functions".
3. Select entry "Reset to factory setting".
4. In the editor area, click on "Reset to factory settings".
5. Acknowledge the confirmation prompt with "OK".
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Engineering and remote access
3.9 Web server
141