Addressing (Mac Address) - Siemens SITOP UPS1600 Equipment Manual

3.2

Addressing (MAC address)

In a network, the SITOP UPS1600 is addressed using its physical MAC device address. This is
printed on the front side of the basic device.
Further, the basic devices are equipped with a 2 port switch, which can also be identified
using the following MAC addresses in the network:
• Ethernet port 1: MAC address of the basic device + "1"
• Ethernet port 2: MAC address of the basic device + "2"
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Engineering and remote access
3.2 Addressing (MAC address)
61