Table of Contents
Advertisement
1.4 Transceiver Unit
The physical distance between the hull unit and the transceiver unit should be no more than
5 m. The transceiver unit should be mounted on a mounting base (shipyard supply) whose
dimensions are as shown in the outline drawing of the transceiver unit at the back of this
manual. Reinforce the transceiver unit against vibration by stays extending from the
eyebolts on the top of the unit. Fasten four bolts (M12, local supply) at the bottom of the
transceiver unit to fix the unit to the mounting location.
1.5 Grounding the Equipment
Transceiver unit, junction box: Use copper strap (supplied).
Processor unit:
Junction box for hull unit:
1-12
Transceiver unit
Use a ground wire (IV-8SQ).
Use the wing bolt on the junction box.
CHARGE
BV ERR
OV ERR
FUSE
Hide quick links:
Advertisement
Table of Contents
