Adjustment And Check; Hull Unit Check - Furuno FSV-30 Installation Manual

3. ADJUSTMENT AND CHECK

3.1 Hull Unit Check

Note: Before conducting this check (at the dry dock) transmission must be stopped. Default
setting of TX power is OFF. Confirm that transmission is off as follows:
1. Turn on the power, and then press the [MENU] key to show the main menu.
2. Use the trackball to choose OTHERS and press the [MENU] key.
MENU
TX PULSE LENGTH-H : 9
TX POWER-H : 9
TVG-NEAR-H : 0
TVG-MEDIUM-H : 0
TVG-FAR-H : 0
AGC-H : 0
2ND AGC-H : 0
ECHO AVERAGE-H : 0
COLOR-H : COLOR 1
COLOR RESPONSE-H : COLOR CURVE 3
H-SCAN SETTING...
V-SCAN SETTING...
OTHERS...
Main menu
MENU
OTHERS
ES1 SETTING...
ES2 SETTING...
ERASE MARKS...
DISPLAY SETTING...
ALARM & AUDIO...
PRESET, MEMORY CARD...
INITIAL SETTING...
OTHERS menu
QUIT
QUIT
QUIT
3-1