Furuno FSV-30 Installation Manual page 28

2.3.2 Power cable
Attach the NCS-253-P connector (CN-A110) to the power cable DPYCY-1.5 (Japan
Industrial Standard (JIS) cable) or the equivalent. Attach the connector to the processor unit.
Solder lead wire to armor and
connect it to #1 pin of connector.
2.3.3 Control cable
Attach the control cable (10S2074 or 10S2075) to the CN-A103 connector in the processor
unit.
2-6
Armor Vinyl sheath
Taping
Use cable DPYCY-1.5
(Japan standard cable)
or equivalent cable.
Assembling connector NCS-253-P
Cable DPYCY-1.5
Vinyl
sheath
Conductor
2
S = 1.5 mm
∅
= 1.56 mm
Armor