Transceiver Unit - Furuno FSV-35 Installation Manual

Flush mount (option)
Use the optional flush mount kit (Type: FP03-09870, Code No.: 008-535-630) to
mount the sub control unit.
Name
Mounting plate
Hex nut
Wing screw
Pan head screw
1. Prepare a cutout in the mounting location referring to the outline drawing at the
back of this manual.
2. Set the unit to the cutout.
3. Attach the mounting plate to the unit with four screws from the rear side.
4. Screw the wing screw to each mounting plate and then insert hex bolt to each wing
screw.
5. Fasten each wing screw and then fasten the hex nuts.
1.4

Transceiver Unit

Select a mounting location considering that the effective length of the cable between
the transceiver unit and the hull unit is 5 m (standard). The transceiver unit should be
fixed to a mounting base (shipyard supply) whose dimensions are as shown in the out-
line drawing at the back of this manual. Reinforce the transceiver unit against vibration
by stays extending from the eye-bolts on the top of the unit. Fasten four bolts (M12,
local supply) at the bottom of the transceiver unit to fix the unit to the mounting base.
Type
03-163-7531 100-306-261
M5 000-863-108
M5x40 000-162-682-10
M4x12 000-163-192-10
1. HOW TO INSTALL THE SYSTEM
Code No. Qty
4
4
4
4
1-11