Removing And Replacing The - YASKAWA CIMR-SSA Series Instruction Manual

(2) Replacing the Digital Operator
Fig. 3 Replacing the Digital Operator
NOTE Never fit the digital operator in any other direction or by any other method.
The digital operator will not be connected to the inverter.
2.2
REMOVING AND REPLACING THE FRONT COVER
To remove the front cover, first move the digital operator in the direction shown by arrow 1. (See Par.
2.1.) Then squeeze the cover in the direction shown by arrows 2 on both sides and lift in the direction
shown by arrow 3.
Fig. 4 Removing and Replacing the Front Cover
Digital Operator
1
Front Cover
Front Cover
2
3
Engage the digital operator on claws A in the
direction shown by arrow 1 and then on claws
2
B in the direction shown by arrow 2 to lock
the digital operator.
1
2
2 INSTALLATION
Claws A
Claws B
17