YASKAWA CIMR-SSA Series Instruction Manual page 50

Step Description
• Return to constant No. display.
:
• Move to tuning mode (T1-02).
• Verify the set value.
• Change the value to "02" (tuning mode).
• Write-in the value.
• Return to drive mode.
Adjustment start
3
Adjustment completed
4
Note: After verifying the set value of C2-13, write the value in Table A-7 in APPENDIX 5.
Key Sequence Digital Operator Display
DSPL
RESET
DATA
ENTER
RESET
DATA
ENTER
Displays for 0.5 seconds.
DRIVE
PRGM
RUN
Automatic adjustment during blinking
4 OPERATION
Setting completed.
Setting completed.
Displays for 2 seconds.
G
Adjustment completed.
51