Mixing Signals Of Inputs A Through D; Connecting Sound Sources To Input A Through Input D; [To Stereo Buss On/Off] Key Setting - Fostex MR-8CD Owner's Manual

MR-8HD/CD
Owner's Manual (Track bouncing)

Mixing signals of inputs A through D

The MR-8HD/CD can mix input signals of [INPUT A] through [INPUT D]. The following diagram
shows an example of mixing signals of INPUT A through INPUT D when bouncing tracks 1 through
6 to tracks 7/8. As you can see, the signals of INPUT A through INPUT D are mixed to the L/R
stereo buss together with the bounced signals.
INPUT A
INPUT B
INPUT C
INPUT D

Connecting sound sources to INPUT A through INPUT D

Before starting track bouncing, connect the de-
sired sound source(s) to any desired input(s)
between INPUT A and INPUT D.
Sound source (s)
INPUT A SELECT
INPUT A INPUT B
BAL BAL
UNBAL
/GUITAR INSERT UNBAL
DISTORTION TRIM TRIM
MAX LINE
MIN MIC LINE MIC
GUITAR
PEAK PEAK
ON/ ON/
OFF OFF
TO STEREO BUSS
Adjust the input level of each input using the
[TRIM] control to match the balance with the
bounced track levels.
Also, you can adjust panning of each input for
stereo mix. See the next page for details about
how to set panning.
If you press the [TO STEREO BUSS ON/OFF] key when make recording other than track bouncing, the
<Note>:
key lamp may flash. This shows the input signal is routed to the armed track. That is, the input signal will be
recorded to the armed track, in stead of mixed to the stereo buss.
Trk 1
Playback
Trk 2
Playback
Trk 3
Playback
Trk 4
Playback
Trk 5
Playback
Trk 6
Playback
TRIM
Trk 7
Record
Trk 8
Record
INPUT C INPUT D
BAL BAL
UNBAL UNBAL
[TRIM] control
TRIM TRIM
LINE MIC LINE MIC
PEAK PEAK
ON/ ON/
OFF OFF
Reverb
or
DElay
Bouncing
STEREO OUT (L, R)

[TO STEREO BUSS ON/OFF] key setting

To mix the input signal of an input channel (any
of INPUT A through INPUT D) to the L/R stereo
buss, turn on the corresponding [TO STEREO
BUSS ON/OFF] key.
INPUT A SELECT
INPUT A
UNBAL
/GUITAR
DISTORTION
MAX LINE
MIN
GUITAR
[TO STEREO BUSS ON/OFF] key
When the [TO STEREO BUSS ON/OFF] key is
turned on, the key illuminates in green. That is,
when the key illuminates, input signal is sent to
recording tracks. (Note that when the key
flashes, the corresponding input is assigned to
any recording track.)
72
INPUT B INPUT C INPUT D
BAL BAL BAL BAL
INSERT UNBAL UNBAL UNBAL
TRIM TRIM TRIM TRIM
MIC LINE MIC LINE MIC LINE MIC
PEAK PEAK PEAK PEAK
ON/ ON/ ON/ ON/
OFF OFF OFF OFF
TO STEREO BUSS