Exchanging Whole Track Data - Fostex MR-8CD Owner's Manual

MR-8HD/CD
Owner's Manual (Track editing)
You can select the same number of tracks as
the move source track(s). For example, if you
select a mono track for the move source, you
can only select a mono for the move destina-
tion.
<Note>: You cannot select the same track(s)
for the move source and destination.
7) Rotate the [MENU/ENTER] knob to select
destination track(s), and press the
[MENU/ENTER] knob.
"Dest. Track = *" is now highlighted on the screen.
8) Rotate the [MENU/ENTER] knob to move the
cursor to "[ENTER]" on the screen, and press the
[MENU/ENTER] knob.
The display shows "Please Wait", immediately
followed by "Completed" when the MR-8HD/
CD completes the move operation.
<Note>: If you want to cancel the move opera-
tion, move the cursor to " [CANCEL] " on the
screen, and press the [ MENU/ENTER ] knob.

Exchanging whole track data

You can exchange whole data (from ABS ZERO to REC END) between the desired track(s).
ABS ZERO
TRK 1
TRK 2
TRK 3
TRK 4
TRK 5
TRK 6
TRK 7
TRK 8
You cannot exchange track data of a song
<Note>:
protected. Release the protection before exchang-
ing track data.
Flashing
9)
10)
REC END
1)
2)
3)
108
If a destination track has recorded
<Note>:
data, moving data overwrites the previous
data.
Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where "Move Track " is highlighted.
Press the [STOP] key to exit the menu mode.
<Note>: If you are not satisfied with the re-
sult, press the [ UNDO/REDO ] key to undo the
operation (see page 103).
Load the song you want to edit.
While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "
highlighted initially (selecting "
returns to the previous screen).
Rotate the [MENU/ENTER] knob to select
"Track Edit ", and press the [MENU/ENTER] knob.
The display now shows the track edit menu
screen, where " Back" is highlighted.
Back" is
Back"