Reset Button; External Sync (Mav Plus Video Models) - Extron electronics MAV Plus Series User Manual

Installation, cont'd

Reset button

j
N IP settings reset does not replace any user-installed firmware.
N Hard reset does not clear the current configuration.

External sync (MAV Plus video models)

The MAV Plus switcher switches between inputs during the vertical interval
period, resulting in glitch-free video switching. The MAV switcher can use an
external signal to synchronize switching during the vertical interval. Without the
external sync locking feature, switching between inputs can result in a brief rolling
(sync loss) or a brief change in the picture size.
k
Figure 2-22 — Simple external sync connection example
2-18 CrossPoint / MAV Matrix Switchers • Installation
Reset button — The Reset button initiates four levels of reset to
the matrix switcher. Press and hold the button while the switcher
is running or while you power up the switcher for different reset
levels.
See "Rear panel Operations" in chapter 3, "Operation", for details.
• Events (mode 3) reset — Hold Reset for 3 seconds then release and push
again to toggle events monitoring on and off.
• IP settings (mode 4) reset — Hold Reset for 6 seconds then release and
push again to reset the switcher's IP functions.
• Absolute (mode 5) reset — Hold Reset for 9 seconds then release and
push again to restore the switcher to the default factory conditions.
• Hard reset — Hold Reset while powering up the switcher to restore the
switcher to the default factory conditions.
Ext(ernal) Sync connector — Connect an external sync signal to this BNC
connection for genlocking the video signal in broadcast or other sync-critical
applications.
Figure 2-22 shows a basic external sync configuration. The Ext Sync connector
receives the timing signal. A tee connector on the connector allows the
signal to be passed on to another video device, if required. Terminate the tee
connector if desired.
BBG 6 A
BLACK BURST/COLOR BAR
/AUDIO GENERATOR
1 3 5
POWER
1 KHZ AUDIO
12V
+4dBu
0.5A MAX
L 1 R ON
1 2 3
2 4 6
BLACKBURST/
-10dBV PAL
COLORBAR BLACKBURST
Connect to
MAV Plus AV 3232.
EXT
SYNC
RESET
Extron
BBG 6 A
Black Burst Color Bar
Audio Generator
OUT
Tee-connector
Terminate cable or
connect to another device.
Extron
MAV Plus 3232
Matrix Switcher