Extron electronics MAV Plus Series User Manual page 133

X5#
= Verbose mode
N If tagged responses is enabled (modes 2 and 3), all read commands return the constant string and the value as the set command does
(for example, the read matrix name command
X5$
= Flow control
X5%
= Data pacing (in ms between bytes)
X5^
= Time (in 10-ms increments) to wait for characters
X5&
= Time (in 10-ms increments) to wait between characters
X5*
= Port timeout interval (in 10-sec. increments)
0 = clear/none (default for Telnet connection)
1 = verbose mode (default for RS-232/RS-422 connection)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
E } X3)]
CN , returns Ipn•
hardware, software, none (only the first letter required)
0000 (default) - 1000
10 (= 100 ms, default) - 32767
2 (= 20 ms, default) - 32767
1 (= 10 seconds) - 65000 (default is 30 = 300 seconds = 5 minutes)
CrossPoint / MAV Matrix Switchers • Programmer's Guide
).
4-23