Global Presets Page; Saving A Preset - Extron electronics MAV Plus Series User Manual

Global Presets page

You can save and recall global presets from the Global presets page (figure 6-20).
Access the Global presets page by clicking the Global Presets link on the left of the
Control page.
Set and View Ties
RGB & Audio Settings
Refresh
Figure 6-20 — Global Presets page

Saving a preset

Save the current configuration (configuration 0) as a preset as follows:
1. Click the Save Preset button.
2. Select the desired preset by clicking on one of the presets listed. To create a
new preset, click one of the [unassigned] buttons. Overwrite an existing
preset by clicking an already existing preset.
3. If desired, type over the current name in the box adjacent to the Save Preset
button.
N Preset names are limited to up to 12 upper and lower case alphanumeric
N The following characters are invalid in preset names:
If you do not rename an unassigned button, the CrossPoint or MAV switcher
names the preset as Preset {the selected preset number}, "Preset 08" for
example.
If you do not rename an existing preset when it is overwritten, the
CrossPoint or MAV switcher retains the same name.
4. Click the Accept button.
characters and the {space} _ and / characters.
+ ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
CrossPoint / MAV Matrix Switchers • HTML Operation 6-19