Preferences Menu - Extron electronics MAV Plus Series User Manual

Matrix Software, cont'd

Preferences menu

Immediate changes — Causes configuration changes to take
Hold/verify changes — Delays implementation of
Ties as lines — Displays ties as lines (figure 5-16).
Figure 5-16 — Ties shown as lines
Ties as crosspoints — Displays ties as a grid of inputs and outputs (figure 5-17).
Figure 5-17 — Ties shown as crosspoints
Frequency read options (CrossPoint only) — Allows you to set the input signal
Limit ties to same group — Allows you to limit the creation of ties using the
5-22 CrossPoint / MAV Matrix Switchers • Matrix Software
effect immediately.
configuration changes until the Changes – Take button
is pressed.
Ties that have been made are indicated as amber (video and audio), green
(video only), and red (audio only) boxes. Ties that will take effect when you
click the Take button are indicated by +. Ties that will be broken when you
click the Take button are indicated by –.
detection (DSVP) feature as follows:
• To never sample and display the sync or no sync status
(set this option to None)
• To automatically refresh the display
(set this option to Automatically every 10 seconds)
• To sample the sync and update the display whenever you make a
configuration change (set this option to On demand or by refresh).
program to inputs and outputs that are in the same group (similar to front
panel operation).