92
|
Printing with Epson Drivers for Macintosh
To control the amount of expansion (with the Auto Expand setting), select
Expansion from the drop-down menu. You see this screen:
Adjust the slider to increase or decrease the amount of expansion.
The widths shown in the table on page 91 work with the Standard
Expansion setting. If you use the slider to adjust the amount of expansion,
you can calculate the image width as follows:
Using the
setting, subtract 0.125 inch from the media width to
•
Min
determine the image width.
Using the
setting, subtract 0.415 inch from the media width to
•
Max
determine the image width.
3-92