Epson Stylus Pro 7800 Printer Manual page 145

Tip: For more secure
transportation, tape all
doors and covers shut.
Maintaining and Transporting the Printer
4. Reinstall the carriage locking bracket and screw that were removed
during setup, as shown below.
5. Remove the printer from the stand. First make sure the casters are
locked and the two stabilizer knobs are touching the floor.
Caster lock
6. Remove the two wing nuts and lock washers securing the printer to the
stand (underneath the printer). Keep them in a safe place.
5-145
| 145
Stabilizer knob