Epson Stylus Pro 7800 Printer Manual page 61

Note: Opening the front
cover causes printing to
stop. Do not open the
front cover while printing
is in progress, or your
print quality might be
affected.
7. Holding the bottom edge of the paper, turn the roll back to remove any
slack. Then align the bottom edge with the horizontal line and the right
edge with the vertical line.
8. Move the paper lever to the locked position, then close the roll paper
cover.
9. Press the Pause button (or wait for 5 seconds). The paper feeds into
printing postion automatically, and
panel.
To avoid indenting or creasing the paper, remove it from the paper path and
roll it up when you are not printing.
2-61
Handling Paper and Other Media
appears on the control
READY
| 61