Loading Cut Sheets - Epson Stylus Pro 7800 Printer Manual

Tip: You can also load cut
sheet paper without
releasing the paper lever.
This method is
recommended for small
sheets or fine art paper.
Note: For heavy paper,
you may need to increase
the suction by pressing
the u button. This helps
hold the paper in place
during loading and
printing.
For lightweight paper,
decrease the suction by
pressing the d button.
Caution: To avoid
damaging the printer,
never move the paper
lever during printing, or
while the P Power or
Pause light is flashing.

Loading Cut Sheets

Follow these steps to load cut sheet paper.
1. Make sure the printer is on and the roll paper cover is closed.
2. Press the l Paper Source button until the
display.
3. Push the paper lever back to the released position.
4. Feed the sheet into the paper slot. Make sure the right and bottom edges
of the paper are straight and aligned with the scale on the printer.
5. Pull the paper lever forward, to the secured position.
6. Press the Pause button. The sheet feeds into printing position
automatically and
7. Print your page. After it is finished, the sheet stays in the printer.
8. To remove your print, press the
2-65
Handling Paper and Other Media
appears on the control panel.
READY
button or release the paper lever.
|
icon appears on the LCD
65