Epson Stylus Pro 7800 Printer Manual page 111

Note: You may need to
change the Color Density
setting if your custom
profile was created to
optimize D-max and color
gamut.
Printing with Epson Drivers for Windows
You see the following:
Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer's control panel.
lets you control the ink saturation level (for example,
• Color Density
when you turn off color management in your printer software).
• Drying Time per Print Head Pass
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry.
• Paper Feed Adjustment
value if you see white lines on your prints, or a higher value if you
see dark lines.
lets you decrease the paper suction level when
• Paper Suction
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
• Paper Thickness
sharper image when printing on unusually thick or thin paper.
decreases the cutting blade pressure for thinner media,
• Cut Method
and adjusts the speed for thick media. You may need to experiment
to determine the best setting for your paper.
4-111
lets you print with non-Epson
helps reduce banding. Choose a lower
helps reduce vertical banding and creates a
| 111