Viewing Status Information - Epson Stylus Pro 7800 Printer Manual

Maintaining and Transporting the Printer

Viewing Status Information

To view printer status information instead of printing it, follow these steps:
1. Press the button.
Menu
2. Press the d button until
.
Menu
3. Do one of the following:
To check the firmware version, press
•
press the l button.
To check the number of pages that can be printed with each ink
•
cartridge, press d to highlight
. Press d to view the number of pages remaining for each
Menu
cartridge. When done, press the l button.
This option must be enabled using maintenance mode on the
printer's control panel. See page 136 for instructions.
To check the amount of ink left, press d to highlight
•
then press
Menu
the
E*****F
to see the status of the remaining cartridges. When done, press the l
button.
To check how much of the maintenance tank has been used, press
•
d to highlight
status of the tank is displayed, using the
on on page 120. As the tank is filled, the percentage drops. When
done, press the l button.
To check the amount of ink used (in milliliters) and paper used
•
(in centimeters), press d to highlight
. Clear this setting with the
Menu
You can change the units of measurement from centimeters to
inches and feet using maintenance mode on the printer's control
panel. See page 136 for instructions.
5-121
PRINTER STATUS
PRINTABLE PAGES
. The status of the first cartridge is displayed, using
symbols described on page 120. Continue pressing d
MAINTENANCE TANK
CLEAR USAGE COUNT
is highlighted, then press
again. When done,
Menu
, then press
INK LEVEL
, then press . The
Menu
symbols described
E*****F
, then press
USAGE COUNT
| 121
,
option.