Unpacking The Printer - Epson Stylus Pro 7800 Printer Manual

4. Insert the support bar into one of the base sections as shown. Then
attach it with two bolts using the included wrench.
Leave the bolts a little loose, so that you can adjust the position when
you insert the bolts at the other end.
5. Attach the base section to the other end.
6. Tighten all four bolts securely.

Unpacking the Printer

1. Open the box and remove the roll paper, spindle, polystyrene foam, and
cardboard cushions.
1-29
Setting Up the Printer | 29