Replacing The Paper Cutter Blade; Removing The Old Blade - Epson Stylus Pro 7800 Printer Manual

138 | Maintaining and Transporting the Printer
Note: You can purchase
replacement parts from
an authorized Epson
reseller. To find the
nearest reseller, please
call 800-GO-EPSON
(800-463-7766). To
purchase online, visit
www.epsonstore.com
(U.S. sales only). In
Canada, please call
(800) 463-7766 for
reseller referral.
Caution: Do not try to
slide the carriage by
hand, or you may damage
the printer.
To return all control panel settings to their default values, press the
•
the d button to highlight
display
EXEC.
To check the ink cartridges, press the d button to highlight
•
INFO MENU
then press
Menu
4. To exit maintenance mode, turn off the printer by pressing the
P Power button. Press the P Power button again to turn on the printer
in the normal operating mode.

Replacing the Paper Cutter Blade

If you notice that your paper isn't being cut cleanly, the cutter blade may
need to be replaced. If you use the blade to cut heavy stock, you will damage
the blade and need to replace it. See page 57 for a list of media that do not
work with the cutter.
You can check the status of your cutter by printing the status check sheet or
viewing its status on the control panel. See page 121 for instructions.
You can obtain a new cutter blade from Epson (part number C12C815291).

Removing the Old Blade

Make sure the printer is on, then follow these steps to remove the blade:
1. Press the button.
Menu
2. Press the d button until
Menu.
3. Press again to select
Menu
4. Press the button. The print head moves to the replacement position.
OPEN FRONT COVER TO SEE CUTTER REPLACEMENT LABEL
displayed.
5-138
DEFAULT PANEL
Press to restore the default settings.
, then press . Press d to select each cartridge,
Menu
to view the information.
MAINTENANCE
CUTTER REPLACEMENT.
, then press
Menu
INK
is highlighted, then press
to
is