Delta Electronics AC Drive VFD-F Series User Manual page 66

06 - 08 Low Current Detection Level
Settings
06 - 09 Low Current Detection Time
Settings
06 - 10 Low Current Detection Treatment
Settings
These parameters set the low current detection mode, time, and operation.
06 - 11 Present Fault Record
06 - 12 Second Most Recent Fault Record
06 - 13 Third Most Recent Fault Record
06 - 14 Fourth Recent Fault Record
Settings
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
Operation
Time(min)
5
4
3
2
1
0
20 40 60 80 100 120 140 160 180 200
00~100% (00 disabled)
0.1~ 3600.0 Sec
00: Warn and Ramp to stop
01: Warn and Coast to stop
02: Warn and keep operating
00 No fault occurred
01 Over-current (oc)
02 Over-voltage (ov)
03 Overheat (oH)
04 Overload (oL)
05 Electronic thermal relay (oL1)
06 External fault (EF)
07 AC drive IGBT fault (occ)
08 CPU failure (cF3)
09 Hardware protection failure (HPF)
60Hz or more
50Hz
10Hz
5Hz
Load
factor
(%)
5-33
VFD-F Series
Factory Setting: 00
Unit: 1
Factory Setting: 10.0
Unit: 0.1
Factory Setting: 01
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
5