Group 3: Output Function Parameters - Delta Electronics AC Drive VFD-F Series User Manual

5.4 Group 3: Output Function Parameters

03 - 00 Multi-function Output terminal 1
03 - 01 Multi-function Output terminal 2
03 - 02 Multi-function Output terminal 3
03 - 03 Multi-function Output terminal 4
03 - 04 Multi-function Output terminal 5
03 - 05 Multi-function Output terminal 6
03 - 06 Multi-function Output terminal 7
03 - 07 Multi-function Output terminal 8
Settings
Setting Functions
00 No function
01 Motor No. 1
02 Motor No. 2
03 Motor No. 3
04 Motor No. 4
05 Motor No. 5
06 Motor No. 6
07 Motor No. 7
08 Motor No. 8
09 Auxiliary 1 output
10 Auxiliary 2 output
11 Auxiliary 3 output
12 Auxiliary 4 output
13 Auxiliary 5 output
14 Auxiliary 6 output
15 Auxiliary 7 output
16 Indication during operation
17 Master frequency
attained
18 Zero Speed (including shutdown)
19 Over-torque
20 External Fault
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
00-33
5-15
Descriptions
When starting circulative control, AC drive will
automatic set this parameter by 11-01 to 11-03.
Parameter value 09 to 15 program
Multi-Function Output Terminals
(Pr.03-00~Pr.03-07) to correspond with the AC
drive multi-function input terminals, Pr.04-00 to
04-07(settings 20~26).
The corresponding output will be closed during
operation (including DC brake time).
The corresponding output will be closed when
output frequency reaches master frequency
command.
The corresponding output will be closed when
the AC drive has no output voltage signal.
The corresponding output relay will be closed
when the AC drives output current exceeds the
over-torque detection level 06-04.
The corresponding output will be closed when
the EF is enabled. (Pr. 4-00 to 4-07)
VFD-F Series
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
Factory Setting: 00
5