Output Power (Kw); Feedback Signal Actual Value - Delta Electronics AC Drive VFD-F Series User Manual

This parameter displays output power factor.
00 - 09

Output Power (kW)

This parameter displays output power of the AC drive.
00 - 10

Feedback Signal Actual Value

This parameter displays feedback signal value.
00 - 11 Feedback Signal (%)
This parameter displays feedback signal value (%).
00 - 12 User Target Value (Low bit) uL 0-99.99
00 - 13 User Target Value (High bit) uH 0-9999
User Target Value = Actual output frequency (0-04) × User Defined Multiplier (02-10).
Maximum summed display of both parameters is 999999.99.
When User Target Value <=99.99, 00-13=0.
00 - 14 PLC time
This parameter displays remaining time of PLC each phase.
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
Factory setting: Read Only
5-3
VFD-F Series
5