Table of Contents
Advertisement
Chapter 7: Troubleshooting
SYMPTOM: The system does not start, after the power supply was
switched on.
CAUSE: The fuse is blown.
REMEDY: Replace fuse.
A fuse is installed in the cabinet (6.3 AT) that you can replace as fol-
lows:
Risk of injury due to electric shock!
Disconnect the system from the power supply and secure it against
reconnection.
• Unscrew the fuse holder from the 1F1 6.3 AT fuse terminal using a
suitable screwdriver.
• Replace the fuse if it is blown. You can find a spare fuse with the
key pack.
• Screw the fuse holder back in.
WARNING
1F1 6,3 AT
Fuse holder
57
Troubleshooting
Advertisement
Table of Contents
