Table of Contents
Advertisement
18
Installation
For mounting the temperature probe VIB 6.610
- Drill and drill bit 4.1 mm / 6.8 mm with depth gage and a fine th-
read tap M8 x 1.
- Compressed air for cleaning the drill hole
- Open-end wrench, size 14
For mounting the RPM sensors VIB 6.620 / VIB 6.622
- Suitable mounting bracket with mounting hole (D=19 mm)
- Open-end wrench, size 14, 2 pcs.
For mounting the internal sealing gland VIB 8.307-RT
- Open-end wrench (WAF 11, WAF 24)
- Loctite 480 contact adhesive for securing the threads
For the electrical installation
- Flathead screwdriver, blade width 2.5 or 3.5
- Phillips screwdriver, size PH2
- Wire stripper for coaxial / triaxial cables (VIB 81052 / VIB 81053)
- Wire stripper for Ethernet cable
- Crimping pliers (VIB 81026)
- Diagonal-nosed cutting pliers
- Installation checker(VIB 8.745)
- Multimeter
- 3-wire electric cable for low-voltage supply (1.5 mm²)
- 2-wire electric cable for digital outputs (0.5 mm²)
- Shielded industrial Ethernet cable (CAT 5)
- Insulated wire end ferrules for connecting the following wires:
- Power supply
- Ethernet
- Digital outputs
- Coaxial cable, VIB 90008 for the connection Sensor - MUX
- Triaxial cable, VIB 90080 for the MUX string line
- Standard tools for electrical installations (wire cutters, cable strip-
pers)
- Suitable strain relief devices for cables
- Suitable open-end wrenches for screwed cable glands.
Advertisement
Table of Contents
