Table of Contents
Advertisement
Connecting external process variables (I/U level)
External process variables from a control system can be input to the
VIBRONET Signalmaster system as potential free current or voltage
levels. Connection is made via the VIB 8.312 current/voltage module
in similar fashion to that of RPM and temperature probes.
The module is configured by default for current level measurement.
If voltage level is to be measured, the jumper on the module must be
severed (see illustration at left).
Cable connection:
• Connect positive lead to signal contact.
• Connect negative lead to shield contact.
Jumper
Signal
contact
Shield
contact
Installation
Current/voltage module
VIB 8.312
29
Advertisement
Table of Contents
