Section 1: Introduction - Nortel 600 Series Manual

Section 1: Introduction

S cope and purpose of this publication
1
This Nortel technical publication (NTP) contains the necessary information for
setting dual in-line package (DIP) switches on printed circuit packs and balancing
networks equipped in the DMS-10 switch.
O rganization
1
Section 2 includes information on switch settings for the circuit packs; the switch
setting information is arranged alpha-numerically according to pack code. Section 3
provides information on switch settings for balancing networks; this information is
arranged alpha-numerically according to product code.
The switch setting information for each circuit pack or balancing network includes the
following:
•
•
N otational conventions
1
All tables in this publication use the following notational convention:
August 2006
a simplified outline drawing that identifies each DIP-switch and indicates
its approximate position on the pack or balancing network
Since the purpose for these drawings is to indicate DIP-switch
Note:
positions, physical components located on the faceplate of the pack, such
as LEDs, light pipes, and switches, are not depicted. For information about
these components, refer to NTP 297-3601-500, General Maintenance
Information.
tables indicating the various switch-selectable options and the necessary
settings for each option
"0" indicates that the switch is in the OFF position.
"1" indicates that the switch is in the ON position.
"-" indicates "not applicable" and that the position of the switch is irrelevant.
For Generic 602.20
08.01
1-1
NTP 297-3601-316