Nortel 600 Series Manual page 26

2-19 Switch settings for printed circuit packs
Figure 2-15: NT2T46 (Series A - V) Peripheral Processor pack - switch locations
Table 2-S:
NT2T46 (Series A - V) Peripheral Processor pack - switch settings
DIP Switch
S1
S2
NTP 297-3601-316
8
S1
1
Switches
1 2 3 4
1 1 1 1
1 0 1 0
Note 1: Settings: 1 = ON, 0 = OFF, - = NOT APPLICABLE.
Note 2: NT2T46 releases 0023 and later do not employ DIP switches.
CAUTION: Switches 1 and 2 on the NT2T46 (Series A - V) pack are for shop
testing only. For use in a DMS-10 switch they must be set as indicated above.
For Generic 602.20
5 6 7 8
1 1 1 1
1 0 1 0
08.01
S2
1 8
August 2006