Nortel 600 Series Manual page 10

2-3 Switch settings for printed circuit packs
Figure 2-2: NT2T03 Miscellaneous Line pack - switch locations
Table 2-B:
NT2T03 Miscellaneous Line pack - switch settings
Option
Loop start
Ground start
NTP 297-3601-316
1 6
For correct operation of this pack, the software configuration of
Note:
the pack options must match the DIP-switch option settings. To configure
or query these options in software, refer to Overlay NTWK or CPK, PACK
prompting sequence, prompts STR1 and STR2.
Settings: 1 = ON, 0 = OFF, - = NOT APPLICABLE.
Note:
For Generic 602.20
Circuit 1
Switches
4 5 6
0 1 1
1 0 0
08.01
Circuit 2
Switches
1 2 3
1 1 0
0 0 1
August 2006