Error Codes, Messages, And Solutions - Canon L250 User Manual

Error Codes, Messages, and
Solutions
This table lists the error messages that appear in the FAX-L250 LCD displayand the corresponding
error codes that appear in activity reports, and tellswhat to do for each.
Message Error Code
AUTO REDIAL –
BUSY/NO SIGNAL #005/018
CALLING –
CHANGE CARTRIDGE –
10-30
Cause
The receiving fax machine
was busy and the FAX-L250
is waiting to redial.
The telephone number you
dialled is busy.
The other party's fax
machine is not working
properly.
The other party is not using
a G3 fax machine.
The telephone line type
setting on your FAX-L250 is
incorrect.
The receiving fax machine
did not answer within 35
seconds.
The FAX-L250 is dialling the
receiving fax machine.
The toner cartridge is empty.
The FAX-L250 image
memory may be full because
the toner cartridge ran out of
toner.
Action
–
Try sending the document again
later.
Contact the other party and
have them check their fax
machine.
Contact the other party and
have them send or receive the
document using a G3 machine.
Set your FAX-L250 for your
telephone line (tone or pulse).
Contact the other party and
have them check their fax
machine. You can also try to
send the document manually.
For an overseas call, add pauses
to the registered number.
If you want to cancel the
transmission, press the (
STOP) button.
Make a copy of a document. If
the printout is light or blank,
replace the toner cartridge. The
documents received in memory
will then be printed
automatically.
Replace the toner cartridge and
have the other party send the
fax again.