Canon L250 User Manual page 228

Frequently Asked Questions
Message Error Code
DOCUMENT READY –
ECM RX –
ECM TX –
HANG UP PHONE –
LOAD PAPER –
MEMORY FULL #037
10-32
Cause
The document in the
Automatic Document Feeder
(ADF) is ready for scanning.
The FAX-L250 is receiving a
fax using ECM.
The FAX-L250 is sending a
fax using ECM.
The handset is off its hook.
The FAX-L250 is out of
recording paper.
The FAX-L250's memory is
full because it has received
too many documents, or a
very long or detailed
document.
The memory is full because
you sent too many pages at
once, or a very long or
detailed document.
Action
Send the fax, scan the
document, or make a copy.
Faxes can take longer to receive
when using ECM. Try turning
ECM off if you need to receive
quickly, or if you know your
local telephone lines are in good
condition.
Faxes can take longer to send
when using ECM. Try turning
ECM off if you need to send
quickly, or if you know your
local telephone lines are in good
condition.
Place the handset properly onto
its hook.
Load paper in the sheet feeder.
Any documents received in
memory will then be printed
automatically.
Print out any documents that
are storedin memory. Then start
the operation again. See page
6-17.
Divide the document and send
each part separately. If the
memory contains any faxes, you
do not need to delete them.