FAX-L360 To Register Sender’s Identification Sending Documents Setting Up Speed Dialing One-touch Speed Dial Coded Speed Dial Group Dial To Erase Auto-Dialing Numbers One-touch Speed Dial Coded Speed Dial Group Dial Sending To More Than One Location (Sequential Broadcasting) Sending At A Preset Time...
TO REGISTER SENDER IDENTIFICATION INPUT YOUR FAX NUMBER AND COMPANY NAME Open One-Touch Speed Dial panel Press Data Registration Press Set to display “1. USER SETTINGS” Press Set to display “1. DATE & TIME” ∨ ∨ ∨ ∨ Press to display “2. UNIT TELEPHONE #” Press Set Enter your fax number Press Set to display “3.
SENDING A DOCUMENT DIRECT / MANUAL SENDING Place documents face down on the feeder Press Hook Enter fax number Press Start/Copy N.B. The fax number dialed will not appear in the TX and activity report in the above method. MEMORY SENDING Place documents face down on the feeder Enter fax number Press Start/Copy...
Page 5
TO STORE FAX NUMBERS ONE-TOUCH SPEED DIAL ( 01-KEY TO 32-KEY ) Open One-Touch Speed Dial panel Press Data Registration ∨ ∨ ∨ ∨ Press to display “2. TEL REGISTRATION” Press Set twice ∨ ∨ ∨ ∨ Press (if necessary) until an empty space appears Press Set twice Enter fax number Press Set twice...
Page 6
CODED SPEED DIAL (*00 TO *99 ) Open One-Touch Speed Dial panel Press Data Registration ∨ ∨ ∨ ∨ Press to display “2. TEL REGISTRATION” Press Set ∨ ∨ ∨ ∨ Press to display “2. CODED SPD DIAL” Press Set ∨...
Page 7
TO PROGRAM GROUP DIAL Open One-Touch Speed Dial panel Press Data Registration ∨ ∨ ∨ ∨ Press to display “2. TEL REGISTRATION” Press Set ∨ ∨ ∨ ∨ Press to display “3. GROUP DIAL” Press Set ∨ ∨ ∨ ∨ Press (if necessary) until an empty space appears Press Set twice...
TO ERASE A SPEED DIAL TO CANCEL A NUMBER IN THE ONE-TOUCH SPEED DIAL Follow steps A.1. to A.4. (Refer to III : TO STORE FAX NUMBERS : ONE-TOUCH SPEED DIAL) Close panel cover & press desired one-touch key Press Set twice Press Clear Press Set Press Stop...
SENDING TO MORE THAN ONE LOCATION (SEQUENTIAL BROADCASTING) USING ONE-TOUCH / CODED SPEED DIAL Place documents face down on the feeder Press all the relevant one-touch / coded-dial numbers one right after another If there is one more destination to be dialed manually, enter the number using the numeric 10-key pad Press Start/Copy Take note of “...
TO SEND DOCUMENTS AT A LATER TIME (DELAYED TRANSMISSION) Open One-Touch Speed Dial panel Press Delayed Transmission Press Set Enter the desired time (time set must be within 24 hours from the time on the display) Press Set Enter the fax number Press Start/Copy Place documents face down on the machine Take note of “...
WHEN THE FAX DISPLAYS “RECEIVED IN MEMORY” Display screen flashes message “RECEIVED IN MEMORY” repeatedly and keeps prompting the following : “LOAD PAPER” Action : Refill paper supply “REPLACE CARTRIDGE” Action : Put in a new toner cartridge “REC. PAPER JAM” Action : Remove jammed paper carefully in a whole piece Machine will start to print the received documents from the memory.
VIII RE-SENDING IF No.VII ABOVE METHOD IS NOT POSSIBLE, EACH DOCUMENT RECEIVED IN THE MEMORY CAN BE RE-SENT INDIVIDUALLY TO ANOTHER DESTINATION FOR PRINTING Open One-Touch Speed Dial panel Press Memory Reference ∨ ∨ ∨ ∨ Press to display “3. RESEND DOCUMENT” Press Set ∨...
TO PRINT REPORTS AND LISTINGS SPEED DIAL LIST Open One-Touch Speed Dial panel Press Report Press ∨ ∨ ∨ ∨ to display “2. SPEED DIAL LIST” Press Set Press ∨ ∨ ∨ ∨ to search for desired list i.e. “1. 1-TOUCH LIST”, “2. CODED DIAL LIST” or “3.GROUP DIAL LIST”...
MAKING COPIES Place documents face down on the feeder Press Start/Copy Enter the number of copies required Press Start/Copy To cancel the printing, press Stop again to start copying...
TRANSMISSION REPORT To set up Transmission (TX) Report For Every Document Sent Out Open One-Touch Speed Dial panel Press Data Registration Press Set ∨ ∨ ∨ ∨ Press to display “2.REPORT SETTINGS” Press Set twice ∨ ∨ ∨ ∨ Press to select “OUTPUT YES”...
ERASING A TRANSMIT DOCUMENT FROM THE MEMORY Press Memory Reference ∨ ∨ ∨ ∨ Press to select “4.DELETE DOCUMENT” Press Set ∨ ∨ ∨ ∨ Press to display the desired TX/RX number Press Set Press * to confirm deletion Press Stop...