Canon L250 User Manual page 219

Problem
The FAX-L250 will not switch
between telephone and fax calls
automatically?
The FAX-L250 will not receive
faxes manually?
Possible cause
The FAX-L250 may not be in
Fax/Tel Mode.
The FAX-L250 may have a
document in memory.
An error may have occurred
during reception.
The sheet feeder may be empty.
The sending fax machine may
not send the CNG signal that
tells the FAX-L250 that the
incoming signal is a fax.
You may not have pressed the
( START/COPY) button
before hanging up the handset.
Problems Index
Solution
For the FAX-L250 to switch
automatically between
telephone and fax calls, it must
be in Fax/Tel Mode. See page
6-3.
Print out any documents stored in
memory. See page 6-17.
Check the LCD display for an
error message. See page 10-30 for
a listing of the FAX-L250's error
messages.
Print an activity report and look
for an error code.
Make sure the sheet feeder has
paper in it.
In such cases, you will have to
receive the document manually.
See page 6-9.
Always press the (
START/COPY) button before
hanging up the handset. If you
hang up before pressing the
START/COPY) button you will
disconnect the call.
10-23
(