Canon L250 User Manual page 121

3
Press START/COPY.
¶ The FAX-L250 then begins scanning the
document into memory and dials the number:
After a few seconds, the display shows the
number of pages it has scanned:
The display then shows the transaction number
for the fax. This is a unique number the
FAX-L250 assigns to the document, and is used
to identify the document in transaction reports:
The display continues to show these three
displays in order while the fax is sending.
¶ When the FAX-L250 finishes sending the fax,
the display shows the TRANSMITTING OK
message:
If an error occurs during sending, the FAX-L250 will print out an error report. If this
happens, try sending the fax again. See Faxing Problems on page 10-20 for details
about errors.
Sending Documents
TX
SCANNING P. 001
TX/RX NO. 0002
TRANSMITTING OK
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
5-19