Operation Bar - Panasonic BB-HCM311 Troubleshooting Manual

Operation Bar

Problem
Pan/tilt, click to • Your PC is not connected to the camera.
center and
preset features
do not work.
• The camera is not turned on.
• Multiple users are operating the camera simultaneously.
• The pan/tilt reaches its end.
• The pan/tilt range is restricted.
Part of the • The feature is not permitted on the General User page.
buttons on the
operation bar
are not
displayed.
All manuals and user guides at all-guides.com
Cause and Remedy
Click [Refresh] on the web browser. Confirm that the image
refreshes, and operate the pan/tilt functions.
Confirm that the camera is turned on.
Wait for a while, and access the camera again.
Confirm that the end display is displayed on the operation
bar.
Adjust the pan/tilt range settings (see page 85 of the
Operating Instructions on the Setup CD-ROM).
Permit the feature to be used (see page 92 of the Operating
Instructions on the Setup CD-ROM). Or log in to the camera
as an administrator.
Troubleshooting
13