Using Operation Bar - Panasonic KX-HCM280 Operating Instructions Manual

3.3.1 Using Operation Bar

Operation bar controls the general use of the Network Camera. The following
sections describe the general way of using it.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(1) End Display: When Pan/Tilt operation has reached the
end, Left End, Right End, Up End or Down End
appears. When Zoom/Focus operation has reached the
end, Wide End, Tele End, Near End or Far End appears.
Locked Display: Pan/Tilt/Preset, Brightness Control,
Preset program, Zooming and Focusing can be locked.
Locked appears when the operation bar is clicked.
Preset Display: Preset name appears when clicking
Preset Button.
(2) Pan/Tilt Scan, Pan/Tilt and Home Position:
Refer to page 44.
(3) Zoom Buttons: Refer to page 45.
(4) Focus Buttons: Refer to page 46.
(5) Preset Buttons: Refer to page 47.
(6) Brightness: Brightness control has nine steps including
[STD] (Standard). Clicking [-] and [+] buttons changes the
brightness of image. Brightness can be locked on Camera
Setup window on page 85.
(7) Resolution: [640 x 480], [320 x 240] (default) or [160 x
120]
(8) Image Quality: [Favour Clarity] optimises the image for
good clarity. [Standard] keeps the standard quality.
[Favour Motion] optimises the image for motion display.
(9) Image Size: The default image size is x 1. [x 1.5] expands
only the size. The resolution does not change.
(10) Buffered Image: [Capture] links to the Buffered Image
screen on page 50. [Alarm] and [Timer] will be displayed
on the operation bar when checking [Enable] for their
Controls on Image Transfer.
(11) Link Buttons: Each button links to Multi-Camera screen,
Top Page and Help Page.
Operating Instructions
43