Panasonic BB-HCM311 Troubleshooting Manual page 6

Troubleshooting
Problem
The camera IP
address and port
number have
been forgotten.
The password
has been
forgotten.
Error is displayed
on the camera
status by the
Setup Program.
6
All manuals and user guides at all-guides.com
• Clicking [Camera Setup] on the Setup Program displays the
camera list. The camera list shows the MAC address labeled
beside the Ethernet (LAN) port. The camera IP address and
port number are shown next to the MAC address.
• Press the FACTORY DEFAULT RESET button to reset the
camera to default. Set up the camera again.
• The Setup Program causes the error message.
Disconnect the plug of the AC cord from the outlet, and
reconnect it again.
Cause and Remedy