Type 2 Printer: Installing Envelope Feeder Type 1400 - Ricoh Laser AP1600 Setup Manual

Installing Options
E
Pull the paper tray out until it
stops. After that, lift it slightly,
then pull it out of the printer.
Place it on a flat surface.
2
Note
Do not touch the three white
pins on the right front of the pa-
per feed unit.
F
Remove the white protective
sheet from the inside of the paper
tray.
G
Remove the red protective sheet
taped on the guide.
26
H
While lifting the front of the pa-
per tray, place it into the printer.
Then slide it into the printer until
it stops.
Type 2 Printer: Installing
Envelope Feeder Type 1400
Note
See the inside front cover of this
manual to confirm which printer
(Type 1 Printer or Type 2 Printer)
you have.
Important
This unit is a tray that slides into
the optional paper feed unit. With-
out the optional paper feed unit,
this envelope feeder cannot be
used.
Do not slide more than one paper
tray out at a time. Having more
than one paper tray filled with pa-
per in a fully extended position
could cause the printer to tilt for-
ward.
A
Confirm that the box contains the
following items.
• Envelope feeder
• Installation Guide