Table of Contents
Advertisement
Installing the Printer Driver and Software
G
Insert the CD-ROM into the CD-ROM drive while pressing the { { { { SHIFT} } } } key
until the computer finishes accessing the CD-ROM.
If the Auto Run program starts, click [Cancel].
H
Change the drive name in the list box to the name of the CD-ROM drive,
and then click [Browse].
I
In the [Folders:] box, double-click [PS] and [NT4]. Then double-click the fold-
er of the appropriate language for the operating system. Finally, click
[Open].
J
Click [OK].
A printer model selection dialog box appears.
K
4
Click to select the name of the printer whose driver you want to install, and
then click [Next].
A dialog box for changing the printer name appears.
L
Change the name of the printer if you want, and then click [Next].
M
Click [Next].
N
In the next dialog box asking if you want to print a test page, select [No] and
then click [Finish].
The installer copies the printer driver files from the CD-ROM to the compu-
ter's hard disk.
Note
Print a test page after completing installation and restarting Windows.
O
If you are asked to insert the Windows NT 4.0 CD-ROM, insert it in the
computer, and then click [OK].
P
If you are asked to provide the driver of the Windows NT 4.0 CD-ROM, se-
lect the drive of the Windows NT 4.0 CD-ROM.
Q
If you are asked to provide the location of the required file, select the ap-
propriate folder. The location of the appropriate folder may differ depend-
ing on the version of the operating system. The following is an example:
• folder named [i386] of the Windows NT 4.0 CD-ROM.
After installation is completed, the [Printers] window appears with the icon of
the newly installed printer.
R
If you are asked whether you want to restart Windows, select [Yes]. If you
are not asked, restart Windows after completing the installation.
Important
If the printer is equipped with certain options (ex. the paper feed unit or
memory unit), you should set up the options with the printer driver.
48
Advertisement
Table of Contents
