Table of Contents
Advertisement
Installing Options
B
Remove the back plate.
2
Note
A coin can be used to remove
the screws.
C
Tilt the memory unit so that it is
30 degrees perpendicular to the
slot (A A A A ), and push it forward (B B B B ).
It should click into place.
D
Attach the back plate to its origi-
nal position.
24
Note
A coin can be used to attach the
screws.
E
Turn on the printer's power
switch.
F
Print a configuration page to con-
firm that the memory unit is prop-
erly installed.
Reference
See "Printing a configuration
page" in the "Printer Reference"
included as a PDF file on the
CD-ROM.
BM3P050E
Advertisement
Table of Contents
