Envelope Feeder Type 2600 - Ricoh AP600N Setup Manual

Installing Options

Envelope Feeder Type 2600

Note
❒ This unit is a tray that slides into
the optional Paper Feed Unit.
Without the optional Paper Feed
2
Unit, this Envelope Feeder cannot
be used.
❒ Your printer can accommodate
two optional Paper Feed Units.
The Envelope Feeder Unit can be
used in "Tray 2". Neither the main
unit's feed tray (Tray 1) nor Tray 3
can be used for this purpose.
Important
❒ Do not slide more than one paper
tray out at the same time. Having
more than one full paper tray fully
extended could cause the machine
to topple.
The following explanation uses the
example of installing the Envelope
Feeder Unit in "Tray 2".
A A A A
Check the contents of the box for
the following items:
• Envelope Feeder
• Installation Guide
B B B B
Pull out the second paper tray
(Tray 2) of the optional Paper
Feed Unit until it stops. After that,
lift it slightly, and then pull it out.
24
Important
❒ The Envelope Feeder must be
used in the top-most optional
Paper Feed Unit (Tray 2).
❒ The tray of the top-most option-
al Paper Feed Unit is beneath
the paper tray.
Note
❒ Keep the paper tray with paper
in a cool dark place.
C C C C
Lift the front of the Envelope
Feeder, and slide it carefully into
the printer until it stops.
Reference
For information about loading
paper, see "Loading Envelopes"
in the Printer Reference on the
CD-ROM labeled "Operating
Instructions".
ZKGP330E
ZKGP340E