Ricoh Laser AP1600 Setup Manual page 23

Is off when the printer is offline (a state in
which the printer can not receive data).
3.
Power indicator
Is on while the printer power is on.
Is off when the power is turned off or
while the printer is in Energy Saver
mode.
4.
Error indicator
Blinks or lights up whenever any printer
error occurs. A message describing the
Keys
Important
Pressing any operation key while the Data In indicator blinks or stays on may
cause data in the printer to be lost.
{ { { { On Line} } } } key
1.
Press this key to switch the printer be-
tween online and offline.
{ { { { Job Reset} } } } key
2.
When the printer is online, press this key
to cancel any ongoing print job.
See "Canceling a Print job" in the "Printer
Reference" included as a PDF file on the
CD-ROM.
{ { { { Escape} } } } key
3.
Press this key to return to the previous
condition on the panel display.
cause of the error also appears on the
panel display.
See "Error & Status Messages on the Opera-
tion Panel" in the "Printer Reference" in-
cluded as a PDF file on the CD-ROM.
5.
Data In indicator
Blinks while the printer is receiving data
from a computer.
Is on if there is data to be printed.
2 3
1
6 7
5
{ { { { U U U U } } } } { { { { T T T T } } } } keys
4.
Use these keys to increase or decrease
values on the panel display when making
settings.
{ { { { Form Feed} } } } key
5.
If the printer is offline, press this key to
print all the data left in the printer's input
buffer.
Note
This does not work if the printer is on-
line.
Guide to the Printer
4
1
11