Operation; Key Positions; Touch Screen - Bosch Rexroth IndraControl VDP 08.3 Manual

DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
6.3

Operation

6.3.1

Key Positions

6.4

Touch Screen

Fig.6-3: Position of the keys on the VDP 08.3 and VDP 40.3
The keys are located below the screen.
The application software is operated via the touch-sensitive interface of the
display.
Start the calibration via the preinstalled "IPCMnt.exe" maintenance program.
The program is to be found under Start ▶ ProgramFiles ▶ Bosch Rexroth.
The icons available on the touch screen depend on the used application soft‐
ware.
NOTICE
Operate the touch screen only with a touch pen or your finger.
Bosch Rexroth AG
Display and Operating Components
Danger of touch screen desctruction caused
by operating the touch screen with inappropri‐
ate objects (e.g. with a screwdriver)!
43/81